Contact Us – (303) 960-7669

Solar Installation, Maintenance, Repair, & Inspections

Solar Installations
Done Right


Keeping Your Solar
Investment Working

Restarting and power cycling your Solar System String Inverter.

So your Solar System is not producing? My Solar system isn’t working?

Restarting and power cycling your Solar System String Inverter.

If you have a String inverter you can try the following steps!

Step 1.

Turn off the Solar system using the Rotary Switch. Turn it counter clockwise to the off position. it will look something like this. Sometimes the String inverters switch might be on the bottom. (Note: you might have multiple inverters you can leave them on or off)

Turn it off!

Step Two.

Pull down AC/DC disconnects to off position.

Turn It off!

Step 3 Optional Step 4 turn off the PV Breakers

The breakers are usually the bottom breakers and should always be specially labelled Solar PV. Turn them to off. If there is no breaker skip this step.

Turn off the breakers

Step 4

Turn everything back on

Wait about 5 minutes until system repeats fault/error code or starts producing! Then bring everything back online going backwards with the steps. Turn the Breakers back to on, turn on DC/AC disconnects and turn Inverter to on!

If the fault or error code does not clear give us a call. We will be happy to assist you.